Spacings are based on the framing to be perpendicular to the face grain & the below are recommendations only:
|Type||Spacings (mm)||Thickness (mm)|
An extract from Austral Plywoods Fixing Set-Out:
We recommend a water-based coating and oil based can react with the glueline.
Intergrain recommends at least 3 coats on the face, as well one coat on the back & edges to ensure against moisture ingress.
As well, Cabot’s has a great estimator online as to how much stain is required based on the m2.
To prevent mould from growing on the coating, it is recommended for a mould preventer additive to be incorporated in semi-exposed applications and interior applications subject to high humidity.
The information provided herein is believed to be accurate but is not warranted to be, whether it originated with PPS or not. This information cannot be warranted by PPS to be correct or appropriate for the recipient’s intended use. Recipients are advised to confirm in advance of need that the information is correct, applicable and suitable to their circumstances.